CD-HF - High flow dedicated case drain line - Provides a means of draining excess oil from motors commonly used in rotary attachment circuits such as mulchers, brush cutters, shear rotation circuits, eccentric rippers etc. May be used as an electrical conduit line in some configurations. 3/4" inside diameter hose and tubing.
CST - Custom kit design - Kit configuration falls outside the standard HKX design and requires additional engineering time and/or components to satisfy requirements. Custom kits and kits designed for out of production machines, once ordered, are non-cancelable. HKX will not accept returns of custom or out of production kits.
FLNG - 4-Bolt SAE flanged high duty cycle tubing - Provides high duty cycle capabilitiy and pressure spike resistance.
HP - High Pressure Return and Supply lines 5000 PSI - Circuit includes high pressure hoses on both sides.
XHFA - Extra High Flow Supply line - Circuit supply line is larger than standard to allow for lower velocity through piping, creating less backpressure.
XHFB - Extra High Flow Return Line - Circuit return line is larger than standard to allow for lower velocity through piping, creating less backpressure and more efficient operation, commonly required for single direction breakers, compactors and other attachments.
BLT-G1 - Bolt On Boom Plumbing - HKX supplied boom tubes, clamps and support brackets will bolt into position, requiring little to no welding.
WLD-G2 - Weld On Arm Plumbing - HKX supplied arm tube support brackets will require test-positioning and welding.
Check Valve - Allows oil to flow in one direction only.
Secondary Circuit
Oil Direction:
Double Direction
Circuit Config:
CD-HF - High flow dedicated case drain line - Provides a means of draining excess oil from motors commonly used in rotary attachment circuits such as mulchers, brush cutters, shear rotation circuits, eccentric rippers etc. May be used as an electrical conduit line in some configurations. 3/4" inside diameter hose and tubing.
KLS - Complete Arm Plumbing - Arm plumbing group starting from the existing boom-tip tubing and terminating towards the bucket linkage on the arm.
WLD-G2 - Weld On Arm Plumbing - HKX supplied arm tube support brackets will require test-positioning and welding.
RF - Return line dedicated filter - Provides additional protection for the carrier from contaminated auxiliary return oil.
